DEFROMATION BAR
Diameter Area/mm2 Meter/Kg. Feet/Kg
10 mm 78.57 1.613 5.319
12 mm 113.14 1.124 3.69
16 mm 201.14 0.633 2.075
20  mm 314.29 0.405 1.33
22  mm 380.29 0.334 1.099
25  mm 491.07 0.259 0.85
28 mm 616 0.207 0.678
32 mm 804.57 0.158 0.519
36 mm 1018.29 0.125 0.41
40  mm 1257.14 0.101 0.332

DEFORMED BAR

Deformed bar is usually formed from carbon steel, and is given ridges for better mechanical anchoring reinforced concrete.

DEFROMATION BAR
Diameter Area/mm2 Meter/Kg. Feet/Kg
10 mm 78.57 1.613 5.319
12 mm 113.14 1.124 3.69
16 mm 201.14 0.633 2.075
20  mm 314.29 0.405 1.33
22  mm 380.29 0.334 1.099
25  mm 491.07 0.259 0.85
28 mm 616 0.207 0.678
32 mm 804.57 0.158 0.519
36 mm 1018.29 0.125 0.41
40  mm 1257.14 0.101 0.332
Alfa G-500 TMT Bars Mechanical Properties Alfa G-60 Bars Mechanical Properties
Yeild Strenght: 500 MPA (min) (72,500 psi) Yeild Strenght: 420 MPA (min) (60,000 psi)
Ultimate Tensile Streght: 575 MPA (min) (83,375 psi) Ultimate Tensile Strength: 620 MPA (min) (90,000 psi)
Elongation (%): 14% (min) Elongation  (%): (9% (min)

PLAIN ROUND BAR

Hot Rolled Steel Round Bar is widely used for all general fabrication and repairs in industrial maintenance.

Plain Round Bar
Diameter Meter/Kg Feet/Kg
6mm 4.369 14.286
12mm 1.14 3.704
14mm 0.838 2.725
16mm 0.641 2.083
18mm 0.506 1.645
20mm 0.41 1.333
22mm 0.338 1.099
24mm 0.285 0.926
27mm 0.183 0.731
30mm 0.142 0.595
34mm 0.114 0.461
38mm 0.114 0.37
TMT Bars Mechanical Properties
Yeild Strenght: 300 MPA (min) (43,500 psi)
Ultimate Tensile Strenght: 380 MPA (min) (55,000 psi)
Elongation (%): 15% (min)
Square Bar
Size (axb) Meter/kg Feet/Kg
9×9 (mm) 0.2 0.65
10×10 (mm) 0.137 0.4452
11×11 (mm) 0.1053 0.3421
12×12 (mm) 0.885 0.2876
14×14 (mm) 0.649 0.211
16×16 (mm) 0.498 0.1617
18×18 (mm) 0.394 0.128
20×20 (mm) 0.318 0.1035
22×22 (mm) 0.263 0.855
25×25 (mm) 0.204 0.662
28×28 (mm) 0.163 0.528
32×32 (mm) 0.124 0.404

SQUARE BAR

Hot Rolled Steel Square Bar is widely used for all general fabrication and repairs in industrial maintenance.

Square Bar
Size (axb) Meter/kg Feet/Kg
9×9 (mm) 0.2 0.65
10×10 (mm) 0.137 0.4452
11×11 (mm) 0.1053 0.3421
12×12 (mm) 0.885 0.2876
14×14 (mm) 0.649 0.211
16×16 (mm) 0.498 0.1617
18×18 (mm) 0.394 0.128
20×20 (mm) 0.318 0.1035
22×22 (mm) 0.263 0.855
25×25 (mm) 0.204 0.662
28×28 (mm) 0.163 0.528
32×32 (mm) 0.124 0.404

COLD TWISTED BAR

Cold Twisted Bar gains its strength from the cold rolling process in which the steel is twisted at room temperature.

Cold Twisted Bar
Diameter (inch) Meter/Kg. Feet/Kg.
3/8″ 1.894 6.061
7/16″ 1.447 4.63
1/2″ 1.096 3.509
5/8: 0.702 2.247
3/4″ 0.473 1.515
7/8″ 0.351 1.124
1″ 0.267 0.853
Mechanical Properties (Cold Twisted ar)
Diameter or Dimenion of (inch) Cross Sectional Area Gauge Length (inch) Yield/Proof Load (Ton) Yield/Proof Strenght (Lbs/Sq.inches) Braking Load (Tons) Ultimate Tensile Strength (Lbs/Sq.inches) Elongation (inches) Elongation (%)
3/8″ 0.1369 2.0″ 3.4 55631.8 4.5 73630.3 0.46 23
1/2″ 0.1825 2.5″ 5 61639.8 6.6 81008.2 0.52 20.8
5/8″ 0.2623 3.0″ 7.3 62340.8 9.5 81128.4 0.62 20.6
3/4″ 0.4618 3.5″ 12.5 60632.3 16 77609.3 0.74 21.1
7/8″ 0.5914 4.0″ 15.7 59465.6 20.1 76131.2 0.82 20.5
1″ 0.7645 4.5″ 21 61530.4 27.2 79696 0.9 20.5